Dell PowerEdge C6400 EMC Installation and Service Manual - Page 53
Cooling fans, Removing a cooling fan
View all Dell PowerEdge C6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Next steps 1. Follow the procedure listed in After working inside your enclosure. Cooling fans Removing a cooling fan Prerequisites WARNING: Do not attempt to operate the system without the cooling fans. WARNING: The cooling fan spins for some time after the system is powered off. Allow the fan to stop spinning before removing it from the system. 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your enclosure. Steps Disconnect the fan cable from the connector on the cooling fan cage and lift the fan out. Figure 37. Removing a cooling fan Next steps 1. Install a cooling fan. 2. For more information about the fan status, see the management software. Installing a cooling fan Prerequisites 1. Follow the safety guidelines listed in Safety instructions. Steps 1. Align the cooling fan with the fan slot on the cooling fan cage, and push the cooling fan until it is firmly seated. Installing and removing enclosure components 53