Dell PowerEdge C6400 EMC Installation and Service Manual - Page 60
Installing the chassis management board
View all Dell PowerEdge C6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Figure 45. Removing the chassis management board Next steps 1. Install the chassis management board. Installing the chassis management board Prerequisites 1. Follow the safety guidelines listed in Safety instructions.. Steps 1. Insert the chassis management board into the enclosure, aligning the guide slots with the standoffs on the chassis. 2. Push the board toward the back of the enclosure to align the screw holes on the board and standoffs chassis. 3. Using the Phillips #2 screwdriver, replace the screws to secure the board in place. 60 Installing and removing enclosure components
Figure 45. Removing the chassis management board
Next steps
1.
Install the chassis management board
.
Installing the chassis management board
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
..
Steps
1.
Insert the chassis management board into the enclosure, aligning the guide slots with the standoffs on the chassis.
2.
Push the board toward the back of the enclosure to align the screw holes on the board and standoffs chassis.
3.
Using the Phillips #2 screwdriver, replace the screws to secure the board in place.
60
Installing and removing enclosure components