Dell PowerEdge C6400 EMC Installation and Service Manual - Page 66

Installing the left midplane

Get Dell PowerEdge C6400 PDF manuals and user guides View all Dell PowerEdge C6400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

5. Disconnect all the connected cables. Steps 1. Using the Phillips #1 screwdriver, remove the screws that secure the midplane. 2. Slide and lift the midplane out of the chassis. 3. Using the Phillips #1 screwdriver, remove the screws that secure the power cables to the midplane. Figure 53. Removing the left midplane Next steps 1. Install the midplanes. Installing the left midplane Prerequisites NOTE: You must route the cables properly on the chassis to prevent them from being pinched or crimped. 1. Follow the safety guidelines listed in Safety instructions. Steps 1. Using the Phillips #1 screwdriver, connect and secure the power cables to the midplane. 2. Place the midplane into the chassis. 3. Using the Phillips #1 screwdriver, secure the midplane to the chassis with the screws. 66 Installing and removing enclosure components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
5.
Disconnect all the connected cables.
Steps
1.
Using the Phillips #1 screwdriver, remove the screws that secure the midplane.
2.
Slide and lift the midplane out of the chassis.
3.
Using the Phillips #1 screwdriver, remove the screws that secure the power cables to the midplane.
Figure 53. Removing the left midplane
Next steps
1.
Install the midplanes
.
Installing the left midplane
Prerequisites
NOTE:
You must route the cables properly on the chassis to prevent them from being pinched or crimped.
1.
Follow the safety guidelines listed in
Safety instructions
.
Steps
1.
Using the Phillips #1 screwdriver, connect and secure the power cables to the midplane.
2.
Place the midplane into the chassis.
3.
Using the Phillips #1 screwdriver, secure the midplane to the chassis with the screws.
66
Installing and removing enclosure components