Dell PowerEdge C6400 EMC Installation and Service Manual - Page 84
Additional tape maybe required to secure the cables., Steps, Next steps
View all Dell PowerEdge C6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
NOTE: Additional tape maybe required to secure the cables. 1. Follow the safety guidelines listed in Safety instructions. Steps 1. Route the control panel cable through the cable retention clips. 2. Install the control panel assembly and secure it in place with screws. Figure 75. Installing the left control panel Figure 76. Installing the right control panel Next steps 1. Reconnect the control panel cable to the midplane. 2. Install the drive cage into the enclosure. 84 Installing and removing enclosure components
NOTE:
Additional tape maybe required to secure the cables.
1.
Follow the safety guidelines listed in
Safety instructions
.
Steps
1.
Route the control panel cable through the cable retention clips.
2.
Install the control panel assembly and secure it in place with screws.
Figure 75. Installing the left control panel
Figure 76. Installing the right control panel
Next steps
1.
Reconnect the control panel cable to the midplane.
2.
Install the drive cage into the enclosure
.
84
Installing and removing enclosure components