Dell PowerEdge MX840c EMC PowerEdge MX840c Installation and Service Manual - Page 138
Drive indicator codes
![]() |
View all Dell PowerEdge MX840c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Table 38. Power button LED Power button LED indicator code Off On Slowly blinking Condition Sled is not operating, regardless of power supply available. Sled is operating, one or more of the non-standby power supplies are active. Sled is performing powering on sequence and iDRAC is still booting. Drive indicator codes Each drive carrier has an activity LED indicator and a status LED indicator. The indicators provide information about the current status of the drive. The activity LED indicator indicates whether the drive is currently in use or not. The status LED indicator indicates the power condition of the drive. Figure 96. Drive indicators 1. Drive activity LED indicator 2. Drive status LED indicator 3. Drive capacity NOTE: If the drive is in the Advanced Host Controller Interface (AHCI) mode, the status LED indicator does not turn on. Table 39. Drive indicator codes Drive status indicator code Flashes green twice per second Off Flashes green, amber, and then turns off Flashes amber four times per second Flashes green slowly Solid green Flashes green for three seconds, amber for three seconds, and then turns off after six seconds Condition Identifying drive or preparing for removal. Drive ready for removal. NOTE: The drive status indicator remains off until all drives are initialized after the system is turned on. Drives are not ready for removal during this time. Predicted drive failure. Drive failed. Drive rebuilding. Drive online. Rebuild stopped. 138 System diagnostics and indicator codes
![](/manual_guide/products/dell-poweredge-mx7000-emc-poweredge-mx840c-installation-service-manual-cd200d6/138.png)