Dell PowerEdge MX840c EMC PowerEdge MX840c Installation and Service Manual - Page 62

Installing the drive backplane, Steps, Next steps, Prerequisites

Get Dell PowerEdge MX840c PDF manuals and user guides View all Dell PowerEdge MX840c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

6. Disconnect the cables that are connected to the drive backplane. Steps 1. Using Phillips #2 screwdriver, loosen the two captive screws on the drive backplane. 2. Holding the edges, lift the backplane away from the sled. Figure 33. Removing the drive backplane Next steps 1. Install the drive backplane. Installing the drive backplane Prerequisites 1. Follow the safety guidelines listed in the Safety instructions section. 2. Follow the procedure listed in the Before working inside your sled section. Steps 1. Align the hooks and captive screws on the drive backplane with the slots and screw holes on the sled. 2. Lower the drive backplane until it seat into place. 3. Using a Phillips #2 screwdriver, tighten the two captive screws to secure the drive backplane to the sled. 62 Installing and removing sled components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
6.
Disconnect the cables that are connected to the drive backplane.
Steps
1.
Using Phillips #2 screwdriver, loosen the two captive screws on the drive backplane.
2.
Holding the edges, lift the backplane away from the sled.
Figure 33. Removing the drive backplane
Next steps
1.
Install the drive backplane
.
Installing the drive backplane
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
section.
2.
Follow the procedure listed in the
Before working inside your sled
section.
Steps
1.
Align the hooks and captive screws on the drive backplane with the slots and screw holes on the sled.
2.
Lower the drive backplane until it seat into place.
3.
Using a Phillips #2 screwdriver, tighten the two captive screws to secure the drive backplane to the sled.
62
Installing and removing sled components