Dell PowerEdge MX840c EMC PowerEdge MX840c Installation and Service Manual - Page 21
Memory Settings, Memory Settings details
![]() |
View all Dell PowerEdge MX840c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Option Description System Service Specifies the system Service Tag. Tag System Manufacturer Indicates the name of the Original Equipment Manufacturer (OEM). System Manufacturer Contact Information Indicates the contact information of the Original Equipment Manufacturer (OEM). System CPLD Version Specifies the current version of the system, complex programmable logic device (CPLD) firmware. Secondary System CPLD Version Specifies the current version of the system, complex programmable logic device (CPLD) firmware. UEFI Compliance Specifies the UEFI compliance level of the system firmware. Version Memory Settings You can use the Memory Settings screen to view all the memory settings and enable or disable specific memory functions, such as system memory testing and node interleaving. View Memory Settings To view the Memory Settings screen, perform the following steps: Steps 1. Turn on, or restart your system. 2. Press F2 immediately after you see the following message: F2 = System Setup NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart your system and try again. 3. On the System Setup Main Menu screen, click System BIOS. 4. On the System BIOS screen, click Memory Settings. Memory Settings details About this task The Memory Settings screen details are explained as follows: Option Description System Memory Specifies the memory size in the system. Size System Memory Specifies the type of memory that is installed in the system. Type System Memory Specifies the system memory speed. Speed System Memory Specifies the system memory voltage. Voltage Pre-operating system management applications 21
![](/manual_guide/products/dell-poweredge-mx7000-emc-poweredge-mx840c-installation-service-manual-cd200d6/21.png)