Dell PowerEdge MX840c EMC PowerEdge MX840c Installation and Service Manual - Page 47
Installing the sled cover, Next steps, Prerequisites, Steps
![]() |
View all Dell PowerEdge MX840c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Figure 17. Removing the sled cover Next steps 1. Install the sled cover. Installing the sled cover Prerequisites 1. Follow the safety guidelines listed in the Safety instructions section. 2. Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the sled. Steps 1. Align the tabs on the sled cover with the guide slots on the sled. 2. Slide the cover towards the front of the sled until it locks in place. Installing and removing sled components 47
![](/manual_guide/products/dell-poweredge-mx7000-emc-poweredge-mx840c-installation-service-manual-cd200d6/47.png)
Figure 17. Removing the sled cover
Next steps
1.
Install the sled cover
.
Installing the sled cover
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
section.
2.
Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the sled.
Steps
1.
Align the tabs on the sled cover with the guide slots on the sled.
2.
Slide the cover towards the front of the sled until it locks in place.
Installing and removing sled components
47