Dell PowerEdge MX840c EMC PowerEdge MX840c Installation and Service Manual - Page 22
Persistent Memory details, Dell Fault Resilient Mode
View all Dell PowerEdge MX840c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Option Video Memory System Memory Testing Description Specifies the amount of video memory. Specifies whether the system memory tests are run during system boot. Options are Enabled and Disabled. This option is set to Disabled by default. NOTE: When Enabled the system takes more to boot. The booting time depends on the size of the system memory. Native tRFC Timing for 16Gb DIMMs Memory Operating Mode Enables 16 Gb density DIMMs to operate at their programmed Row Refresh Cycle Time (tRFC). Enabling this feature may improve system performance for some configurations. However, enabling this feature will have no effect on configurations with 16 Gb 3DS/TSV DIMMs. This option is set to Enabled by default. Specifies the memory operating mode. The options available are Optimizer Mode, Single Rank Spare Mode, Multi Rank Spare Mode, Mirror Mode, and Dell Fault Resilient Mode. This option is set to Optimizer Mode by default. NOTE: The Memory Operating Mode option can have different default and available options based on the memory configuration of your system. NOTE: The Fault Resilient Mode option establishes an area of memory that is fault resilient. This mode can be used by an operating system that supports the feature to load critical applications or enables the operating system kernel to maximize system availability. NOTE: Only Optimizer Mode should be selected when Intel DC Optane Persistent Memory is installed. Current State of Specifies the current state of the memory operating mode. Memory Operating Mode Node Interleaving Specifies if Non-Uniform Memory Architecture (NUMA) is supported. If this field is set to Enabled, memory interleaving is supported if a symmetric memory configuration is installed. If the field is set to Disabled, the system supports NUMA (asymmetric) memory configurations. This option is set to Disabled by default. ADDDC Setting Enables or disables ADDDC Setting feature. When Adaptive Double DRAM Device Correction (ADDDC) is enabled, failing DRAMs are dynamically mapped out. When set to Enabled it can have some impact to system performance under certain workloads. This feature is applicable for x4 DIMMs only. This option is set to Enabled by default. Correctable Error Enables or disables logging of correctable memory threshold error. This option is set to Enabled by Logging default. Opportunistic Self-Refresh Enables or disables opportunistic self-refresh feature. This option is set to Disabled by default. Persistent Memory This field controls Persistent Memory on the system. This option is available if the persistent memory module is installed in the system. Persistent Memory details About this task The Persistent Memory screen details are explained as follows: Option Description Persistent Memory Persistent Memory Scrubbing Enables or disables persistency for NVDIMM-N. If this option is set to Off, persistency for all NVDIMM-N is disabled and is not presented to operating system (data is not preserved). If this option is set to NonVolatile DIMM, persistency for all NVDIMM-N is enabled and presented to operating system (data is preserved). This option is set to Non-Volatile DIMM by default. Enables scrubbing of persistent memory during POST. 22 Pre-operating system management applications