Dell PowerEdge MX840c EMC PowerEdge MX840c Installation and Service Manual - Page 94
Applying thermal grease on top of the processor
![]() |
View all Dell PowerEdge MX840c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Figure 59. Applying thermal grease on top of the processor 5. Place the heat sink on the processor and push down on the base of the heat sink until the bracket locks onto the heat sink. NOTE: ● Ensure that the two guide pin holes on the bracket match the guide holes on the heat sink. ● Do not press on the heat sink fins. ● Ensure that the pin 1 indicator on the heat sink is aligned with the pin 1 indicator on the bracket before placing the heat sink onto the processor and bracket. 94 Installing and removing sled components
![](/manual_guide/products/dell-poweredge-mx7000-emc-poweredge-mx840c-installation-service-manual-cd200d6/94.png)
Figure 59. Applying thermal grease on top of the processor
5.
Place the heat sink on the processor and push down on the base of the heat sink until the bracket locks onto the heat sink.
NOTE:
●
Ensure that the two guide pin holes on the bracket match the guide holes on the heat sink.
●
Do not press on the heat sink fins.
●
Ensure that the pin 1 indicator on the heat sink is aligned with the pin 1 indicator on the bracket before placing the
heat sink onto the processor and bracket.
94
Installing and removing sled components