Dell PowerEdge MX840c EMC PowerEdge MX840c Installation and Service Manual - Page 49
Air shroud, Removing the air shroud from the PEM
![]() |
View all Dell PowerEdge MX840c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Air shroud The air shroud aerodynamically directs the airflow across the entire sled. The airflow passes through all the critical parts of the sled thus allowing increased cooling. The PowerEdge MX840c sled has: ● Air shroud on the processor expansion module (PEM) ● Air shroud on the system board Removing the air shroud from the PEM Prerequisites CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data. 1. Follow the safety guidelines listed in the Safety instructions section. 2. Follow the procedure listed in the Before working inside your sled section. Steps Hold the edges of the air shroud and lift it up and away from the sled. Figure 19. Removing the air shroud from the PEM Next steps 1. Install the air shroud on the PEM. Installing the air shroud on the PEM Prerequisites 1. Follow the safety guidelines listed in the Safety instructions section. 2. Follow the procedure listed in the Before working inside your sled section. Installing and removing sled components 49
![](/manual_guide/products/dell-poweredge-mx7000-emc-poweredge-mx840c-installation-service-manual-cd200d6/49.png)