Dell PowerEdge R200 Hardware Owner's Manual (PDF) - Page 126
System Setup Program on on the system.
View all Dell PowerEdge R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
6 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 7 Open the system. 8 Install the password jumper plug. See Figure 6-1 to locate the password jumper on the system board. 9 Close the system, reconnect the system to the electrical outlet, and turn on the system. 10 Assign a new system and/or setup password. To assign a new password using the System Setup program, see "Using the System Setup Program" on page 35. 126 Jumpers and Connectors
126
Jumpers and Connectors
6
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
7
Open the system.
8
Install the password jumper plug.
See Figure 6-1 to locate the password jumper on the system board.
9
Close the system, reconnect the system to the electrical outlet, and turn
on the system.
10
Assign a new system and/or setup password.
To assign a new password using the System Setup program, see "Using the
System Setup Program" on page 35.