Dell PowerEdge R200 Hardware Owner's Manual (PDF) - Page 86
Open the processor cover. See upward to the fully open position. See
View all Dell PowerEdge R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Figure 3-18. Installing and Removing the Heat Sink 2 1 1 captive screws (4) 2 heat sink 4 Wait 30 seconds for the heat sink to loosen from the processor. 5 If the heat sink has not separated from the processor, carefully rotate the heat sink in a clockwise, then counterclockwise, direction until it releases from the processor. Do not pry the heat sink off of the processor. 6 Lift the heat sink off of the processor and set the heat sink aside. 7 Press down on the processor socket release lever, then pull the release lever upward to the fully open position. See Figure 3-19. 8 Open the processor cover. See Figure 3-19. 9 Lift the processor vertically out of the socket. Leave the processor cover and release lever in the open position so that the socket is ready for the new processor. See Figure 3-19. 86 Installing System Components