Dell PowerEdge R200 Hardware Owner's Manual (PDF) - Page 55
Closing the System, - parts
View all Dell PowerEdge R200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Figure 3-3. Installing and Removing the System Cover 1 2 1 system cover 2 thumbscrew Closing the System 1 Ensure that you did not leave tools or parts inside the system. 2 Place the cover over the sides of the chassis, and slide the cover forward. 3 Tighten the thumbscrew at the back of the system to secure the cover. See Figure 3-3. 4 Replace the system in the rack, and reconnect the peripheral cables. 5 Reconnect the system to the electrical outlet, and turn on the system. Installing System Components 55
Installing System Components
55
Figure 3-3.
Installing and Removing the System Cover
Closing the System
1
Ensure that you did not leave tools or parts inside the system.
2
Place the cover over the sides of the chassis, and slide the cover forward.
3
Tighten the thumbscrew at the back of the system to secure the cover. See
Figure 3-3.
4
Replace the system in the rack, and reconnect the peripheral cables.
5
Reconnect the system to the electrical outlet, and turn on the system.
1
system cover
2
thumbscrew
1
2