Dell PowerEdge R250 EMC Installation and Service Manual - Page 28
Air shroud, Removing the air shroud
View all Dell PowerEdge R250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Air shroud Removing the air shroud Prerequisites CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data. 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. Steps Hold the air shroud at both ends and lift the air shroud out of the system. Figure 17. Removing the air shroud Next steps Replace the air shroud. Installing the air shroud Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. Steps 1. Align the slot on the air shroud with the standoff on the system. 2. Lower the air shroud into the system until it is firmly seated. 28 Installing and removing system components