Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 22
Remote access, Con Management IP address, Management IP address
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Hardware Version: X01 Platform Name : x86_64-dellemc_s5100_c2538-r0 PPID : CN0X4XRXCES007980029 Service Tag : 9CLSG02 License Details Software : OS10-Enterprise Version : 10.3.2E(X) License Type : EVALUATION License Duration: 120 days License Status : 80 day(s) left License location: /mnt/license/9CLSG02.lic Troubleshoot license installation failure An error message displays if the installation fails. License installation failed 1 Verify the installation path to the local or remote location you tried to download the license from. 2 Check the log on the remote server to see why the FTP or TFTP file transfer failed. 3 Ping the remote server from the switch - use the ping and traceroute commands to test network connectivity. If the ping fails: • Check if a Management route is configured on the switch. If not, use the management route command to configure a route to the server network. • Install the server with the license file on the same subnet as switch. 4 Check if the server is up and running. Remote access You can remotely access the OS10 command-line interface (CLI) and the Linux shell. When you install OS10 the first time, connect to the switch using the serial port. Configure remote access • Configure the Management port IP address • Configure a default route to the Management port • Configure a user name and password Remote access OS10 CLI 1 Open an SSH session using the IP address of the device. You can also use PuTTY or a similar tool to access the device remotely. ssh admin@ip-address password: admin 2 Enter admin for both the default user name and password to log into OS10. You are automatically placed in EXEC mode. OS10# Remote access Linux shell ssh linuxadmin@ip-address password: linuxadmin Configure Management IP address To remotely access OS10, assign an IP address to the Management port. 1 Configure the management interface from CONFIGURATION mode. interface mgmt node/slot/port 22 Getting Started
![](/manual_guide/products/dell-powerswitch-s5148fon-os10-enterprise-edition-user-guide-release-1032er1-6fa6c40/22.png)