Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 426
match ip address, match ip next-hop
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 426 highlights
• ethernet node/slot/port[:subport] - Enter the Ethernet interface information as the next-hop interface. • port-channel id-number - Enter the port-channel number as the next-hop interface, from 1 to 128. • vlan vlan-id -Enter the VLAN number as the next-hop interface, from 1 to 4093. Default Command Mode Usage Information Example Not configured ROUTE-MAP The no version of this command deletes the match. OS10(conf-route-map)# match interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# Supported Releases 10.2.0E or later match ip address Configures a filter to match routes based on IP addresses specified in IP prefix lists. Syntax Parameters match ip address {prefix-list prefix-list-name | access-list-name} • prefix-list-name - Enter the name of the configured prefix list. A maximum of 140 characters. • access-list-name - Enter the name of the configured access list. Default Command Mode Usage Information Example Not configured ROUTE-MAP The no version of this command deletes a match. OS10(config)# route-map bgp OS10(conf-route-map)# match ip address prefix-list test10 Supported Releases 10.3.0E or later match ip next-hop Configures a filter to match based on the next-hop IP addresses specified in IP prefix lists. Syntax match ip next-hop prefix-list prefix-list Parameters prefix-list - Enter the name of the configured prefix list. A maximum of 140 characters. Default Not configured Command Mode ROUTE-MAP Usage Information The no version of this command deletes the match. Example OS10(config)# route-map bgp OS10(conf-route-map)# match ip next-hop prefix-list test100 Supported Releases 10.3.0E or later 426 Access Control Lists