Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 477
trust dot1p-map, trust dscp-map
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 477 highlights
Parameters • diffserv - Set the dynamic classification to trust DSCP. • dot1p - Set the dynamic classification to trust Dot1p. • fallback - (Optional) Honor trusting dot1p or DSCP only if other match criteria in this policy map does not qualifies for a packet. Default Command Mode Usage Information Example Disabled POLICY-MAP-CLASS-MAP The ingress QoS policy type and class-trust support this command. OS10(conf-pmap-c-qos)# trust dot1p Supported Releases 10.3.0E or later trust dot1p-map Creates user-defined trust map for dot1p flows. Syntax trust dot1p-map map-name Parameters map-name - Enter the name of the dot1p trust map (up to 32 characters). Default Not configured Command Mode CONFIGURATION Usage Information If trust is enabled, traffic obeys the dot1p map. default-dot1p-trust is a reserved trust-map name. The no version of this command returns the value to the default. Example OS10(config)# trust dot1p-map map1 OS10(config-tmap-dot1p-map)# qos-group 4 dot1p 5 Supported Releases 10.3.0E or later trust dscp-map Creates user-defined trust map for dscp flows. Syntax trust dscp-map map-name Parameters map-name - Enter the name of the dscp trust map (up to 32 characters). Default Not configured Command Mode CONFIGURATION Usage Information default-dscp-trust is a reserved trust-map name. If trust is enabled, traffic obeys this trust map. The no version of this command returns the value to the default. Example OS10(config)# trust dscp-map dscp-trust1 Supported Releases 10.3.0E or later Quality of service 477