Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 361
snmp-server enable traps, snmp-server host
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 361 highlights
snmp-server enable traps Enables SNMP traps. Syntax Parameters snmp-server enable traps [envmon environment-type| snmp snmp-traps-type] • envmon - Specify the type of environmental monitor traps. The following options are available: • fan • supply • temperature • snmp snmp-traps-type - Specify the SNMP traps type. The following options are available:: • authentication • linkdown • linkup Defaults Command Mode Usage Information Disabled CONFIGURATION The no version of this command disables traps. Example OS10(config)# snmp-server enable traps envmon fan OS10(config)# snmp-server enable traps envmon power-supply OS10(config)# snmp-server enable traps envmon temperature OS10(config)# snmp-server enable traps snmp authentication OS10(config)# snmp-server enable traps snmp linkdown OS10(config)# snmp-server enable traps snmp linkup Supported Releases 10.2.0E or later snmp-server host Configures a host to receive SNMP traps. Syntax snmp-server host {hostname | ipv4-address | ipv6-address} {traps | version version-number| snmp-string} [ udp-port port-number] Parameters • hostname | ipv4-address | ipv6-address - Enter either the name or IPv4/IPv6 address of the host. • version-number - Enter the SNMP version number to be used for notification messages. • snmp-string - Enter SNMPv1 community string name • port-number - (Optional) Enter the UDP port number, ranging from 0 to 65535. Defaults Command Mode Usage Information Example Not configured CONFIGURATION The no version of this command disables the host from receiving the SNMP traps. OS10(config)# snmp-server host 10.1.1.1 traps version 1 snmptest udp-port 1 System management 361
![](/manual_guide/products/dell-powerswitch-s5148fon-os10-enterprise-edition-user-guide-release-1032er1-6fa6c40/361.png)