Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 299
show ipv6 ospf interface, Example, Supported Releases, Syntax, Parameters, Default, Command Mode
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 299 highlights
• Checksum-Displays the Fletcher checksum of an LSA's complete contents. • Link count-Displays the number of interfaces for that router. Example OS10# show ipv6 ospf database OSPF Router with ID (10.0.0.2) (Process ID 200) Router Link States (Area 0.0.0.0) ADV Router Age Seq# Fragment ID Link count Bits 1.1.1.1 1610 0x80000144 0 1 B 2.2.2.2 1040 0x8000013A 0 1 10.0.0.2 1039 0x80000002 0 1 Net Link States (Area 0.0.0.0) ADV Router Age Seq# Link ID Rtr count 2.2.2.2 1045 0x80000001 5 2 Inter Area Router States (Area 0.0.0.0) ADV Router Age Seq# Link ID Dest RtrID 1.1.1.1 1605 0x80000027 1 3.3.3.3 Link (Type-8) Link States (Area 0.0.0.0) ADV Router Age Seq# Link ID Interface 1.1.1.1 1615 0x80000125 5 ethernet1/1/1 2.2.2.2 1369 0x8000011B 5 ethernet1/1/1 10.0.0.2 1044 0x80000001 5 ethernet1/1/1 Type-5 AS External Link States ADV Router Age Seq# Prefix 3.3.3.3 3116 0x80000126 400::/64 3.3.3.3 3116 0x80000124 34::/64 Supported Releases 10.3.0E or later show ipv6 ospf interface Displays the configured OSPFv3 interfaces. You must enable OSPFv3 to display the output. Syntax Parameters show ipv6 ospf interface interface interface - (Optional) Enter the interface information: • ethernet - Physical interface (1 to 48) • port-channel - Port-channel interface (1 to 128). • vlan - VLAN interface 1 to 4093). Default Command Mode Example Not configured EXEC OS10# show ipv6 ospf interface ethernet1/1/1 is up, line protocol is up Link Local Address fe80::20c:29ff:fe0a:d59/64, Interface ID 5 Area 0.0.0.0, Process ID 200, Instance ID 0, Router ID 10.0.0.2 Network Type broadcast, Cost: 1 Transmit Delay is 1 sec, State BDR, Priority 1 Designated Router on this network is 2.2.2.2 Backup Designated router on this network is 10.0.0.2 (local) Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Neighbor Count is 1, Adjacent neighbor count is 1 Adjacent with neighbor 2.2.2.2(Designated Router) Supported Releases 10.3.0E or later Layer 3 299