Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 464
policy-map, priority, qos-group dot1p
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 464 highlights
policy-map Enters QoS POLICY-MAP mode and creates or modifies a QoS policy-map. Syntax policy-map policy-map-name [type {qos | queuing | control-plane | application}] Parameters • policy-map-name - Enter a class name for the policy-map (up to 32 characters). • type - Enter the policy-map type. • qos - Create a qos policy-map type. • queuing - Create a queueing policy-map type. • control-plane - Create a control-plane policy-map type. • application - Create an application policy-map type. Defaults Command Mode Usage Information Example qos = class-map type and match-any = class-map filter CONFIGURATION The no version of this command deletes a policy-map. OS10(config)# policy-map p1 Example (Queuing) OS10(config)# policy-map type queuing p1 Supported Releases 10.2.0E or later priority Sets the scheduler as a strict-priority. Syntax priority Parameters None Default WDRR - when priority is mentioned, it moves to SP with default level 1 Command Mode POLICY-MAP-CLASS-MAP Usage Information If you use this command, bandwidth is not allowed. Only the egress QoS policy type supports this command. Example OS10(conf-pmap-que)# priority Supported Releases 10.2.0E or later qos-group dot1p Configures a dot1p trust map to the traffic class. Syntax Parameters qos-group tc-list [dot1p values] • qos-group tc-list - Enter the traffic single value class ID (0 to 7). 464 Quality of service