Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 228
route-reflector-client, router bgp
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
Example (Static - OS10(conf-router-bgp-102)# address-family ipv6 unicast IPv6) OS10(conf-router-bgpv6-af)# redistribute static Example (OSPF - OS10(conf-router-bgp-102)# address-family ipv4 unicast IPv4) OS10(conf-router-bgpv4-af)# redistribute ospf 1 Example (OSPF - OS10(conf-router-bgp-102)# address-family ipv6 unicast IPv6) OS10(conf-router-bgpv6-af)# redistribute ospf 1 Supported Releases 10.2.0E or later route-reflector-client Configures a neighbor as a member of a route-reflector cluster. Syntax route-reflector-client Parameters None Default Not configured Command Mode ROUTER-TEMPLATE Usage Information The device configures as a route reflector, and the BGP neighbors configure as clients in the route-reflector cluster. The no version of this command removes all clients of a route reflector-the router no longer functions as a route reflector. Example OS10(conf-router-template)# route-reflector-client Supported Releases 10.3.0E or later router bgp Enables BGP and assigns an AS number to the local BGP speaker. Syntax Parameters router bgp as-number as-number-Enter the AS number range. • 1 to 65535 in 2-byte • 1 to 4294967295 in 4-byte Default Command Mode Usage Information Example None CONFIGURATION The AS number can be a 16-bit integer. The no version of this command resets the value to the default. OS10(config)# router bgp 3 OS10(conf-router-bgp-3)# Supported Releases 10.3.0E or later 228 Layer 3
![](/manual_guide/products/dell-powerswitch-s5148fon-os10-enterprise-edition-user-guide-release-1032er1-6fa6c40/228.png)