Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 483
Create VLT domain, VLTi configuration, Before
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 483 highlights
Create VLT domain A VLT domain requires an ID number. Configure the same VLT domain ID on both peers, see VLT domain. The no vlt-domain command disables VLT. 1 Configure a VLT domain and enter VLT-DOMAIN mode. Configure the same VLT domain ID on each peer, from 1 to 255. vlt-domain domain-id 2 Repeat the steps on the VLT peer to create the VLT domain. Peer 1 OS10(config)# vlt-domain 1 OS10(conf-vlt-1)# Peer 2 OS10(config)# vlt-domain 1 OS10(conf-vlt-1)# VLTi configuration Before you configure VLTi on peer interfaces, remove each interface from L2 mode with the no switchport command, see VLT interconnect. 1 Enter the VLT domain ID to enter from CONFIGURATION mode. vlt-domain domain-id 2 Configure one or a hyphen-separated range of VLT peer interfaces to become a member of the VLTi in INTERFACE mode. discovery-interface {ethernet node/slot/port[:subport] | ethernet node/slot/port[:subport] node/slot/port[:subport]} 3 Repeat the steps on the VLT peer. Peer 1 OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# no switchport OS10(conf-if-eth1/1/1)# exit OS10(config)# interface ethernet 1/1/2 OS10(conf-if-eth1/1/2)# no switchport OS10(conf-if-eth1/1/2)# exit OS10(config)# vlt-domain 1 OS10(conf-vlt-1)# discovery-interface ethernet1/1/1 OS10(conf-vlt-1)# discovery-interface ethernet1/1/2 Peer 2 OS10(config)# interface ethernet 1/1/1 OS10(conf-if-eth1/1/1)# no switchport OS10(conf-if-eth1/1/1)# exit OS10(config)# interface ethernet 1/1/2 OS10(conf-if-eth1/1/2)# no switchport OS10(conf-if-eth1/1/2)# exit OS10(config)# vlt-domain 1 OS10(conf-vlt-1)# discovery-interface ethernet1/1/1 OS10(conf-vlt-1)# discovery-interface ethernet1/1/2 Virtual link trunking 483
![](/manual_guide/products/dell-powerswitch-s5148fon-os10-enterprise-edition-user-guide-release-1032er1-6fa6c40/483.png)