Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 386
deny tcp (IPv6), deny udp
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 386 highlights
Example OS10(config)# ip access-list testflow OS10(conf-ipv4-acl)# deny tcp any any capture session 1 Supported Releases 10.2.0E or later deny tcp (IPv6) Configures a filter that drops TCP IPv6 packets meeting the filter criteria. Syntax Parameters deny tcp [A::B | A::B/x | any | host ipv6-address [operator]] [A::B | A:B/x | any | host ipv6-address [operator]] [ack | fin | psh | rst | syn | urg] [capture | dscp value | fragment] • A::B - Enter the IPv6 address in hexadecimal format separated by colons. • A::B/x - Enter the number of bits to match to the IPv6 address. • any - (Optional) Set all routes which are subject to the filter: • capture - (Optional) Capture packets the filter processes. • dscp value - (Optional) Deny a packet based on the DSCP values, from 0 to 63. • fragment - (Optional) Use ACLs to control packet fragments. • operator - (Optional) Enter a logical operator to match the packets on the specified port number. The following options are available: • eq - Equal to • gt - Greater than • lt - Lesser than • neq - Not equal to • range - Range of ports, including the specified port numbers. • host ipv6-address - (Optional) Enter the IPv6 address to use a host address only. Default Command Mode Usage Information Example Not configured IPV6-ACL The no version of this command removes the filter. OS10(config)# ipv6 access-list ipv6test OS10(conf-ipv6-acl)# deny tcp any any capture session 1 Supported Releases 10.2.0E or later deny udp Configures a filter to drop user datagram protocol (UDP) packets meeting the filter criteria. Syntax deny udp [A.B.C.D | A.B.C.D/x | any | host ip-address [operator]] [A.B.C.D | A.B.C.D/x | any | host ip-address [operator]] [ack | fin | psh | rst | syn | urg] [capture | dscp value | fragment] Parameters • A.B.C.D - Enter the IP address in dotted decimal format. • A.B.C.D/x - Enter the number of bits to match to the dotted decimal address. • any - (Optional) Set all routes which are subject to the filter: 386 Access Control Lists
![](/manual_guide/products/dell-powerswitch-s5148fon-os10-enterprise-edition-user-guide-release-1032er1-6fa6c40/386.png)