Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 358
radius-server retransmit, radius-server timeout, show ip ssh
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 358 highlights
radius-server retransmit Configures the number of authentication attempts allowed on RADIUS servers. Syntax Parameters Default Command Mode Usage Information Example radius-server retransmit retries retries - Enter the number of retry attempts (0 to 100). An OS10 switch retransmits a RADIUS authentication request three times. CONFIGURATION Use this command to globally configure the number of retransmit attempts allowed for authentication requests on RADIUS servers. The no version of this command resets the value to the default. OS10(config)# radius-server retransmit 50 Supported Releases 10.2.0E or later radius-server timeout Configures the timeout used to resend RADIUS authentication requests. Syntax radius-server timeout seconds Parameters seconds - Enter the time in seconds for retransmission (0 to 1000). Default An OS10 switch stops sending RADIUS authentication requests after five seconds. Command Mode CONFIGURATION Usage Information Use this command to globally configure the timeout value used on RADIUS servers. The no version of this command resets the value to the default. Example OS10(config)# radius-server timeout 360 Supported Releases 10.2.0E or later show ip ssh Displays the SSH server information. Syntax Parameters Default Command Mode Usage Information Example show ip ssh None Not configured EXEC Use this command to view information about the established SSH sessions. OS10# show ip ssh SSH Server: Enabled SSH Server Ciphers: [email protected],aes128-ctr, aes192-ctr,aes256-ctr, [email protected],[email protected] SSH Server MACs: [email protected],[email protected], 358 System management