Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 268

Example OS10(config)# router ospf 10 OS10(config-router-ospf-10)# default-information originate always Supported Releases 10.3.0E or later default-metric Assigns a metric value to redistributed routes for the OSPF process. Syntax default-metric number Parameters number - Enter a default-metric value (1 to 16777214). Default Not configured Command Mode ROUTER-OSPF Usage Information The no version of this command disables the default-metric configuration. Example OS10(conf-router-ospf-10)# default-metric 2000 Supported Releases 10.2.0E or later fast-converge Sets the minimum LSA origination and arrival times to zero (0) allowing more rapid route computation so that convergence takes less time. Syntax Parameters Default Command Mode Usage Information Example fast-converge convergence-level convergence-level - Enter a desired convergence level value (1 to 4). Not configured ROUTER-OSPF Convergence level 1 (optimal) meets most convergence requirements. Only select higher convergence levels following consultation with Dell Technical Support. The no version of this command disables the fast-convergence configuration. OS10(conf-router-ospf-10)# fast-converge 3 Supported Releases 10.2.0E or later graceful-restart Enables the helper mode during a graceful or hitless restart. Syntax graceful-restart role helper-only Parameters None Defaults Disabled Command Mode ROUTER-OSPF Usage Information The no version of this command disables the helper mode. Example OS10(config)# router ospf 10 OS10(conf-router-ospf-10)# graceful-restart role helper-only 268 Layer 3