Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 519
traceroute, Power Supplies
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 519 highlights
Node Id MAC : 1 : 34:17:eb:3a:bc:80 -- Unit -- Unit Status ReqType CurType Version 1 up S5148F S5148F 10.3.2E(X) -- Power Supplies -- PSU-ID Status Type AirFlow Fan Speed(rpm) Status 1 fail 2 up AC NORMAL 1 9040 up -- Fan Status -- FanTray Status AirFlow Fan Speed(rpm) Status 1 up NORMAL 1 8348 up 2 8585 up 2 up NORMAL 1 8295 up 2 8738 up 3 up NORMAL 1 8420 up 2 8529 up 4 up NORMAL 1 8348 up 2 8699 up Supported Releases 10.2.0E or later traceroute Displays the routes that packets take to travel to an IP address. Syntax traceroute host [-46dFITnreAUDV] [-f first_ttl] [-g gate,...] [-i device] [-m max_ttl] [-N squeries] [-p port] [-t tos] [-l flow_label] [-w waittime] [-q nqueries] [-s src_addr] [-z sendwait] [--fwmark=num] host [packetlen] Parameters • host - Enter the host to trace packets from. • -i interface - (Optional) Enter the IP address of the interface through which traceroute sends packets. By default, the interface is selected according to the routing table. • -m max_ttl - (Optional) Enter the maximum number of hops (maximum time-to-live value) that traceroute probes (default 30). • -p port - (Optional) Enter a destination port: • For UDP tracing, enter the destination port base that traceroute uses (the destination port number is incremented by each probe). • For ICMP tracing, enter the initial ICMP sequence value (incremented by each probe). • For TCP tracing, enter the (constant) destination port to connect. • -P protocol - (Optional) Use a raw packet of the specified protocol for traceroute. Default protocol is 253 (RFC 3692). • -s source_address - (Optional) Enter an alternative source address of one of the interfaces. By default, the address of the outgoing interface is used. • -q nqueries - (Optional) Enter the number of probe packets per hop (default 3). • -N squeries - (Optional) Enter the number of probe packets that are sent out simultaneously to accelerate traceroute (default 16). Troubleshoot OS10 519
![](/manual_guide/products/dell-powerswitch-s5148fon-os10-enterprise-edition-user-guide-release-1032er1-6fa6c40/519.png)