Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 267
auto-cost reference-bandwidth, clear ip ospf process, default-information originate, Command Mode
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 267 highlights
Command Mode Usage Information Example ROUTER-OSPF The no version of this command deletes a stub area. OS10(config)# router ospf 10 OS10(conf-router-ospf-10)# area 10.10.1.5 stub Supported Releases 10.2.0E or later auto-cost reference-bandwidth Calculates default metrics for the interface based on the configured auto-cost reference bandwidth value. Syntax auto-cost reference-bandwidth value Parameters value - Enter the reference bandwidth value to calculate the OSPF interface cost in megabits per second (1 to 4294967). Default 100000 Command Mode ROUTER-OSPF Usage Information The value set by the ipv6 ospf cost command in INTERFACE mode overrides the cost resulting from the auto-cost command. The no version of this command resets the value to the default. Example OS10(config)# router ospf 10 OS10(conf-router-ospf-10)# auto-cost reference-bandwidth 150 Supported Releases 10.2.0E or later clear ip ospf process Clears all OSPF routing tables. Syntax Parameters Default Command Mode Usage Information Example clear ip ospf {instance-number} process instance-number - Enter an OSPF instance number (1 to 65535). Not configured EXEC This command clears all entries in the OSPF routing table. OS10# clear ip ospf 3 process Supported Releases 10.2.0E or later default-information originate Generates and distributes a default external route information to the OSPF routing domain. Syntax Parameters Defaults Command Mode Usage Information default-information originate [always] always - (Optional) Always advertise the default route. Disabled ROUTER-OSPF The no version of this command disables the distribution of default route. Layer 3 267