Dell S5148F-ON OS10 Enterprise Edition User Guide Release 10.3.2E-R1 - Page 413
seq permit, seq permit (IPv6
![]() |
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 413 highlights
seq permit Assigns a sequence number to permit packets while creating the filter. Syntax seq sequence-number permit [protocol-number A.B.C.D | A.B.C.D/x | any | host ip-address] [A.B.C.D | A.B.C.D/x | any | host ip-address] [capture | dscp value| fragment]] Parameters • sequence-number - Enter the sequence number to identify the route-map for editing and sequencing number, from 1 to 16777214. • protocol-number - (Optional) Enter the protocol number, from 0 to 255. • A.B.C.D - Enter the IP address in dotted decimal format. • A.B.C.D/x - Enter the number of bits that must match the dotted decimal address. • any - (Optional) Set all routes which are subject to the filter: • capture - (Optional) Capture packets the filter processes. • dscp value - (Optional) Permit a packet based on the DSCP values, from 0 to 63. • fragment - (Optional) Use ACLs to control packet fragments. • host ip-address - (Optional) Enter the IP address to use a host address only. Default Command Mode Usage Information Example Not configured IPV4-ACL The no version of this command removes the filter. OS10(config)# ip access-list testflow OS10(conf-ipv4-acl)# seq 10 permit ip any any capture session 1 Supported Releases 10.2.0E or later seq permit (IPv6) Assigns a sequence number to permit IPv6 packets, while creating a filter. Syntax seq sequence-number permit protocol-number [A::B | A::B/x | any | host ipv6address] [A::B | A:B/x | any | host ipv6-address] [capture | dscp value | fragment] Parameters • sequence-number - Enter the sequence number to identify the route-map for editing and sequencing number, from 1 to 16777214. • protocol-number - (Optional) Enter the protocol number, from 0 to 255. • A::B - Enter the IPv6 address in hexadecimal format separated by colons. • A::B/x - Enter the number of bits that must match the IPv6 address. • any - (Optional) Set all routes which are subject to the filter: • capture - (Optional) Enter to capture packets the filter processes. • dscp value - (Optional) Enter the DSCP value to permit a packet, from 0 to 63. • fragment - (Optional) Enter to use ACLs to control packet fragments. • host ipv6-address - (Optional) Enter the IPv6 address to be used as the host address. Access Control Lists 413
![](/manual_guide/products/dell-powerswitch-s5148fon-os10-enterprise-edition-user-guide-release-1032er1-6fa6c40/413.png)