HP Integrity rx2800 Installation Guide - Page 18
System Insight Display, Table 1-2 Front Panel Controls, System Insight Display LEDs
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Table 1-2 Front Panel Controls Name Function Status UID button The Unit ID (UID) button helps locate a particular Blue = Identification server within a rack of servers. You may remotely Flashing blue = Remote iLO session or a firmware activate this function through various system flash update is in progress utilities. Off = Off System Provides information about the system status. health LED Green = Health good on all internal FRUs and system firmware has passed "BOOT_START" Amber Flashing = A FRU or subsystem has degraded or failed (system on or system in standby mode). Red Flashing = A fatal fault has been detected and logged. Check the Systems Insight Display Panel, other LEDs and the logs for details. Off = Health good on all internal FRUs and system off Power button The power button manually powers the server on Green = System on and off. Amber = System Power Off, but Standby Power is On Off = System Power and Standby Power Off System Insight Display The System Insight Display (SID) consists of several LEDs that can be lit to show the health or failure of aspects of the server. The layout is in such a manner as to mimic the physical placement of components as viewed from the top side of the server. Figure 1-7 System Insight Display LEDs 18 Overview