HP Integrity rx2800 Installation Guide - Page 20

Figure 1-9 Hot-Plug SAS Disk Drive LEDs 1 Drive activity LED Figure 1-9). Table 1-4 SAS Disk Drive LEDs 2 Drive status LED Online/activity LED (green) On, off, or flashing Fault/UID LED (amber/blue) Alternating amber and blue On, off, or flashing On On Flashing regularly (1 Hz) Steadily blue Amber, flashing regularly (1 Hz) Off Amber, flashing regularly (1 Hz) Flashing regularly (1 Hz) Off Flashing irregularly Flashing irregularly Off Amber, flashing regularly (1 Hz) Off Steadily amber Interpretation The drive has failed, or a predictive failure alert has been received for this drive; it also has been selected by a management application. The drive is operating normally, and it has been selected by a management application. A predictive failure alert has been received for this drive. Replace the drive as soon as possible. The drive is online, but it is not active currently. Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. The drive is part of an array that is undergoing capacity expansion or stripe migration, but a predictive failure alert has been received for this drive. To minimize the risk of data loss, do not replace the drive until the expansion or migration is complete. Do not remove the drive. Removing a drive may terminate the current operation and cause data loss. The drive is rebuilding, erasing, or it is part of an array that is undergoing capacity expansion or stripe migration. The drive is active, but a predictive failure alert has been received for this drive. Replace the drive as soon as possible. The drive is active, and it is operating normally. A critical fault condition has been identified for this drive, and the controller has placed it offline. Replace the drive as soon as possible. 20 Overview