HP Integrity rx2800 Installation Guide - Page 4

Memory riser board locations and slot IDs 34 Supported DIMM sizes...35 Memory loading rules and guidelines 35 Installing DIMMs...35 Installing a processor...37 Processor Load Order...37 Installing a processor and heatsink module 39 Completing installation...44 Installing the server into a rack or pedestal 44 Rack installation...44 HP rack...44 Non-HP rack...44 Pedestal kit installation...45 Connecting Server Cables...45 AC Input Power...45 Power States...45 Applying Standby Power to the Server 46 Connecting to the LAN...46 Connecting and Setting Up the Console 46 Setting Up the Console...46 Connecting to a host console...47 Physical access...47 iLO 3 MP LAN...47 HP-UX...47 Setup Checklist...48 Preparation...48 Determining the Physical iLO 3 MP Access Method 48 Determining the iLO 3 MP LAN Configuration Method 49 Configuring the iLO 3 MP LAN Using DHCP and DNS 49 Configuring the iLO 3 MP LAN Using the RS-232 Serial Port 50 Logging In to the iLO 3 MP...51 Additional Setup...51 Modifying User Accounts and Default Password 52 Setting Up Security...52 Security Access Settings...53 Accessing the Host Console...53 Accessing the Host Console With the TUI - CO Command 53 Interacting with the iLO 3 MP Using the Web GUI 53 Accessing the Graphic Console Using VGA 54 Powering On and Powering Off the Server 54 Power States...54 Powering On the Server...55 Powering On the Server Using the iLO 3 MP 55 Powering On the Server Manually 55 Powering Off the Server...55 Powering Off the Server Using the iLO 3 MP 55 Powering Off the Server Manually 56 Verifying Installed Components In the Server 56 Installation Troubleshooting...58 Troubleshooting Methodology...58 Troubleshooting Using the Server Power Button 58 Server Does Not Power On...59 UEFI Menu is Not Available...59 Operating System Does Not Boot...60 Operating System Boots with Problems 60 4 Table of Contents