HP Integrity rx2800 Installation Guide - Page 48
Setup Checklist, Preparation, Determining the Physical iLO 3 MP Access Method
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Setup Checklist Use the checklist in Table 2-5 to assist with the Integrity iLO 3 MP setup process. Table 2-5 Setup Checklist Step Action Standard Setup 1 Preparation Procedure X a. Determine an access method to select and connect the cables. b. Determine a LAN configuration method and assign an IP address if necessary. 2 Configure the iLO 3 MP LAN Choose one of the three methods to configure the LAN for iLO 3 MP access: • DHCP with DNS • RS-232 serial port • Static IP address 3 Log on to the iLO 3 MP Log in to the iLO 3 MP from a supported web browser or command line using the default user name and password. 4 Change default user name and Change the default user name and password on the password administrator account to your predefined selections. 5 Set up user accounts Set up the user accounts if you are using the local accounts feature. 6 Set up security access Set up the security access settings. Advanced Setup 7 Activate Advanced Pack Activate advanced features by entering your license key. Features Preparation You must perform the following tasks before you can configure the iLO 3 MP LAN. • Determine the physical access method to select and connect cables. • Determine the iLO 3 MP LAN configuration method and assign an IP address if necessary. Determining the Physical iLO 3 MP Access Method Before you can access the iLO 3 MP, you must first determine the correct physical connection method. The iLO 3 MP has a separate LAN port from the system LAN port. It requires a separate LAN drop, IP address, and networking information from that of the port used by the operating system. See Figure 1-10 (page 21) for rear panel console connection port identification and cable connection information. Table 2-6 lists the appropriate connection method, required connection components, and connectors to the host console. Use Table 2-6 to determine your physical connection method. Table 2-6 Console Connection Matrix Operating System HP-UX Console Connection Method Local RS-232 serial port LAN port Required Connection Components Console device (for example, a laptop or ASCII terminal) 10/100 LAN cable 48 Installing the server