HP Integrity rx2800 Installation Guide - Page 41
Install the heatsink over the load posts.
View all HP Integrity rx2800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
CAUTION: During installation, after removing the protective cover from the heatsink: • Do not touch or come into contact with the thermal interface material. • Immediately install the heatsink. CAUTION: To avoid damage to the server blade and processor, ensure the processor heatsink's locking handle is fully back against the stops, rotated about 120° back. Also verify that the plastic tabs on the processor's heatsink are pulled fully out before installation. 5. Install the heatsink over the load posts. CAUTION: Do not lower the heatsink locking handle before pushing the plastic locking tabs into place. Installing Additional Components 41
CAUTION:
During installation, after removing the protective cover from the heatsink:
•
Do not touch or come into contact with the thermal interface material.
•
Immediately install the heatsink.
CAUTION:
To avoid damage to the server blade and processor, ensure the processor
heatsink's locking handle is fully back against the stops, rotated about 120° back. Also verify
that the plastic tabs on the processor's heatsink are pulled fully out before installation.
5.
Install the heatsink over the load posts.
CAUTION:
Do not lower the heatsink locking handle before pushing the plastic locking
tabs into place.
Installing Additional Components
41