HP MSA2324sa HP StorageWorks 2300 Family Modular Smart Array CLI reference gui - Page 100
set iscsi-parameters, provides name-to-IP-address mapping. Disabled by default.
![]() |
View all HP MSA2324sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
set iscsi-parameters Description For iSCSI, changes system-wide iSCSI parameters. Syntax set iscsi-parameters [chap enabled|disabled|on|off] [jumbo-frame enabled|disabled|on|off] [speed auto|1g] [isns enabled|disabled|on|off] [isns-ip iSNS-IP] [isns-alt-ip iSNS-IP] Parameters chap enabled|disabled|on|off Enables or disables use of Challenge Handshake Authentication Protocol. Disabled by default. jumbo-frame enabled|disabled|on|off Enables or disables support for jumbo frames. Disabled by default. A normal frame can contain 1500 bytes whereas a jumbo frame can contain a maximum of 9000 bytes for larger data transfers. speed auto|1g Sets the host port link speed either to auto, which allows the system to negotiate the proper speed, or to 1 Gbit/sec (1g). The default is auto. isns enabled|disabled|on|off Enables or disables registration with a specified Internet Storage Name Service server, which provides name-to-IP-address mapping. Disabled by default. isns-ip iSNS-IP Specifies the IP address of an iSNS server. The default address is all zeroes. isns-alt-ip iSNS-IP Optional. Specifies the IP address of an alternate iSNS server, which can be on a different subnet. The default address is all zeroes. Example For a storage system whose host ports are connected to different subnets, enable CHAP, specify the IP address of the iSNS server on each subnet, and enable registration with either server: # set iscsi-parameters chap enabled isns enabled isns-ip 10.10.10.93 isns-alt-ip 10.11.10.90 See also • show iscsi-parameters 100
![](/manual_guide/products/hewlettpackard-msa2312i-hp-storageworks-2300-family-modular-smart-array-cli-reference-guide-500912002-2010-2bf014b/100.png)