HP MSA2324sa HP StorageWorks 2300 Family Modular Smart Array CLI reference gui - Page 74
reset host-link, COMINIT/COMRESET
![]() |
View all HP MSA2324sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
reset host-link Description Resets specified FC or SAS controller host ports (channels). For an FC host port configured to use FC-AL (loop) topology, a loop initialization primitive (LIP) is issued. For a SAS host port, a COMINIT/COMRESET sequence is issued. Syntax reset host-link ports ports Parameters port ports A controller host port ID, a comma-separated list of IDs, a hyphenated range of IDs, or a combination of these. A port ID is a controller ID and port number, and is not case sensitive. Do not mix controller IDs in a range. Example Reset the host link on port A1: # reset host-link ports A1 Success: Command completed successfully. - Reset Host Link(s) on port(s) a1 from current controller. See also • show ports 74
![](/manual_guide/products/hewlettpackard-msa2312i-hp-storageworks-2300-family-modular-smart-array-cli-reference-guide-500912002-2010-2bf014b/74.png)
74
reset host-link
Description
Resets specified FC or SAS controller host ports (channels). For an FC host port configured to use
FC-AL (loop) topology, a loop initialization primitive (LIP) is issued. For a SAS host port, a
COMINIT/COMRESET
sequence is issued.
Syntax
reset host-link ports
ports
Parameters
port
ports
A controller host port ID, a comma-separated list of IDs, a hyphenated range of IDs, or a
combination of these. A port ID is a controller ID and port number, and is not case sensitive. Do not
mix controller IDs in a range.
Example
Reset the host link on port A1:
# reset host-link ports A1
Success: Command completed successfully. - Reset Host Link(s) on port(s) a1 from
current controller.
See also
•
show ports