HP MSA2324sa HP StorageWorks 2300 Family Modular Smart Array CLI reference gui - Page 96
set expander-phy, set expander-fault-isolation, show enclosure-status, show expander-status
View all HP MSA2324sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
set expander-phy Description For use by or with direction from a service technician. Disables or enables a specific PHY. Syntax set expander-phy encl enclosure-ID controller a|b|both type phy-type phy phy-ID enabled|disabled|on|off Parameters encl enclosure-ID The enclosure ID of the enclosure containing the PHY. controller a|b|both The I/O module containing the PHY to enable or disable: A, B, or both. type phy-type The PHY type, which can be one of the following values: • drive • egress • ingress • sc-0 (ingress bus to the local SC) • sc-1 (ingress bus to the partner SC) phy phy-ID The logical PHY number. enabled|disabled|on|off Whether to enable or disable the specified PHY. Example Disable the first egress PHY in controller A, and check the resulting status: # set expander-phy encl 1 controller a type egress phy 0 disabled Success: Command completed successfully. - Disabled PHY 0 on controller a in enclosure 1. (PHY type: EGRESS) # show expander-status Encl Ctlr Phy Type Status Elem Status Disabled Reason ... 1 A 0 Egress Disabled Disabled Disabled 0x8003 Enable the PHY for disk 5 in controller B, and check the resulting status: # set expander-phy encl 1 controller b type drive phy 5 enabled Success: Command completed successfully. - Enabled PHY 5 on controller b in enclosure 1. (PHY type: DRIVE) # show expander-status Encl Ctlr Phy Type Status Elem Status Disabled Reason ... 1 B 5 Drive Enabled-Healthy OK Enabled See also • set expander-fault-isolation • show enclosure-status • show expander-status 96