HP MSA2324sa HP StorageWorks 2300 Family Modular Smart Array CLI reference gui - Page 109
set snmp-parameters, Optional. Deletes a trap destination host.
![]() |
View all HP MSA2324sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
set snmp-parameters Description Sets SNMP parameters for event notification. To enable or disable SNMP requests to the MIB use the set protocols command. Syntax set snmp-parameters [enable crit|warn|info|none] [add-trap-host address] [del-trap-host address] [trap-host-list trap-host-list] [read-community string] [write-community string] Parameters enable crit|warn|info|none Optional. Sets the level of trap notification: • crit: Sends critical events only. • warn: Sends all critical events and warnings. • info: Sends all events. • none: All events are excluded from trap notification and traps are disabled. add-trap-host address Optional. Specifies the IP address of a destination host to send traps to. Three trap hosts can be set. del-trap-host address Optional. Deletes a trap destination host. trap-host-list trap-host-list Optional. Replaces the current list. read-community string Optional. Sets an alphanumeric community string for read-only access. write-community string Optional. Sets an alphanumeric community string for write access. Example Enable critical events only, specify a trap host, and set the community string for read-only access: # set snmp-parameters enable crit add-trap-host 172.22.4.171 read-community public Success: Command completed successfully. - SNMP parameters were changed. See also • set protocols • show snmp-parameters • test HP StorageWorks 2000 G2 Modular Smart Array CLI Reference Guide 109
![](/manual_guide/products/hewlettpackard-msa2312i-hp-storageworks-2300-family-modular-smart-array-cli-reference-guide-500912002-2010-2bf014b/109.png)