HP MSA2324sa HP StorageWorks 2300 Family Modular Smart Array CLI reference gui - Page 167
show snmp-parameters, No events are sent as traps and traps are disabled
![]() |
View all HP MSA2324sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
show snmp-parameters Description Shows SNMP settings for event notification. Syntax show snmp-parameters Output SNMP • enabled: SNMP notification is enabled • disabled: SNMP notification is disabled To enable or disable requests to the SNMP agent use the set protocols command. SNMP Filter • crit: Only critical events are sent as traps • warn: All critical events and warnings are sent as traps • info: All events are sent as traps • none: No events are sent as traps and traps are disabled SNMP Trap Host IP# IP address of each trap host SNMP read community Community string for read-only access (not shown to Monitor users) SNMP write community Community string for write access (not shown to Monitor users) Example Show SNMP notification settings: # show snmp-parameters SNMP: enabled SNMP Filter: crit SNMP Trap Host IP1: 172.22.4.171 SNMP Trap Host IP2: 0.0.0.0 SNMP Trap Host IP3: 0.0.0.0 SNMP read community: public SNMP write community: private See also • set snmp-parameters • show protocols HP StorageWorks 2000 G2 Modular Smart Array CLI Reference Guide 167
![](/manual_guide/products/hewlettpackard-msa2312i-hp-storageworks-2300-family-modular-smart-array-cli-reference-guide-500912002-2010-2bf014b/167.png)