HP MSA2324sa HP StorageWorks 2300 Family Modular Smart Array CLI reference gui - Page 39
create snap-pool, megabytes, or
View all HP MSA2324sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
create snap-pool Description Creates a snap pool to use for snapshot data. A snap pool is an internal volume and cannot be mapped. Syntax create snap-pool vdisk vdisk size size[B|KB|MB|GB|TB|KiB|MiB|GiB|TiB] name Parameters vdisk vdisk Name or serial number of the vdisk to create the snap pool in. For syntax, see Command syntax. size size[B|KB|MB|GB|TB|KiB|MiB|GiB|TiB] Sets the volume size using the current base, as shown by show cli-parameters. The unit can be specified as follows: • If base 2 is in use: B (bytes), KiB (kibibytes), MiB (mebibytes), or GiB (gibibytes) • If base 10 is in use: B (bytes), KB (kilobytes), MB (megabytes), or GB (gigabytes) If no unit is specified, the unit is blocks. The minimum size is 10 GB/GiB. name A name for the new snap pool. The name is case sensitive, cannot include a comma, double quote, or backslash, and can have a maximum of 20 bytes. A name that includes a space must be enclosed in double quotes. Example Create the 20-GB snap pool SP1 on vdisk VD1: # create snap-pool vdisk VD1 size 20GB SP1 Success: Command completed successfully. - The snap-pool was created. See also • show snap-pools • show vdisks HP StorageWorks 2000 G2 Modular Smart Array CLI Reference Guide 39