HP MSA2324sa HP StorageWorks 2300 Family Modular Smart Array CLI reference gui - Page 101
set job-parameters, on the partner controller.
![]() |
View all HP MSA2324sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
set job-parameters Description Sets parameters for background scrub, partner firmware upgrade, and other jobs. Syntax set job-parameters [background-scrub enabled|disabled|on|off] [partner-firmware-upgrade enabled|disabled|on|off] [utility-priority low|medium|high] Parameters background-scrub enabled|disabled|on|off Optional. Sets whether vdisks are checked for disk defects to ensure system health. The interval between background scrub finishing and starting again is 24 hours. partner-firmware-upgrade enabled|disabled|on|off Optional. Sets whether versions of firmware components are monitored and automatically upgraded on the partner controller. utility-priority low|medium|high Optional. Sets the priority at which jobs run with respect to I/O operations competing for the system's processors. This affects vdisk verification and reconstruction, but not background scrub. Example Enable background scrubbing of vdisks and disable partner firmware upgrade: # set job-parameters background-scrub on partner-firmware-upgrade off Info: Command completed successfully. - Parameter 'background-scrub' was set to 'on'. Info: Command completed successfully. - Parameter 'partner-firmware-upgrade' was set to 'off'. Success: Command completed successfully. - The settings were changed successfully. See also • show job-parameters HP StorageWorks 2000 G2 Modular Smart Array CLI Reference Guide 101
![](/manual_guide/products/hewlettpackard-msa2312i-hp-storageworks-2300-family-modular-smart-array-cli-reference-guide-500912002-2010-2bf014b/101.png)