HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 113

Rev 1.6.9 logging local override logging local override [class priority ] no logging local override [class priority ] Enables class-specific overrides to the local log level. The no form of the command disables all class-specific overrides to the local log level without deleting them from the configuration, but disables them so that the logging level for all classes is determined solely by the global setting. Syntax Description override Enables class-specific overrides to the local log level. class Sets or removes a per-class override on the logging level. All classes which do not have an override set will use the global logging level set with "logging local ". Classes that do have an override will do as the override specifies. If "none" is specified for the log level, MLNX-OS will not log anything from this class. Classes available: • iss-modules - protocol stack • mgmt-back - system management back-end • mgmt-core - system management core • mgmt-front - system management front-end • mlx-daemons - management daemons • sx-sdk - switch SDK log-level • alert - alert notification, action must be taken immediately • crit - critical condition • debug - debug level messages • emerg - system is unusable (emergency) • err - error condition • info - informational condition • none - disables the logging locally and remotely • notice - normal, but significant condition • warning - warning condition Default Override is disabled. Configuration Mode Config History 3.1.0000 Role admin Mellanox Technologies 113 Mellanox® Technologies Confidential