HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 321

Rev 1.6.9 lacp (interface) lacp {rate fast | port-priority } no lacp {rate fast | port-priority} Configures the LACP interface parameters. The no form of the command sets the LACP interface configuration to default. Syntax Description rate fast Sets LACP PDUs on the port to be in fast (1 second) or slow rate. (30 seconds). 1-65535 LACP port-priority. Default rate - slow (30 seconds) port-priority 32768 Configuration Mode Config History 3.1.1400 Role admin Example switch (config)# lacp rate fast switch (config)# show lacp interfaces ethernet 1/7 Port : 1/7 Port State = Down Channel Group : 1 Pseudo port-channel = Po1 LACP port-priority = 32768 LACP Rate = Slow LACP Activity : Passive LACP Timeout : Short Aggregation State : Aggregation, Defaulted, Related Commands LACP Port Admin Oper Port Port Port State Priority Key Key Number State 1/7 Down 128 1 1 0x7 0x0 switch (config)# Note Configuring LACP rate (fast or slow) will configure the peer port to send (fast or slow), it does not make any affect on the local port LACP rate. Mellanox Technologies 321 Mellanox® Technologies Confidential