HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 357
ip igmp snooping static-group
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 357 highlights
Rev 1.6.9 ip igmp snooping static-group ip igmp snooping static-group interface no ip igmp snooping static-group interface Creates a static multicast group and attaches a port to a specified group. The no form of the command deletes the interface from the multicast group. Syntax Description Ip address Multicast IP address interface Attach the group to a specific interface. type - ethernet or port-channel Default No static groups are configured. Configuration Mode Config Vlan History 3.1.1400 Role admin Example switch (config)# vlan 1 switch (config vlan 1) # ip igmp snooping static-group 230.0.0.1 inter- face ethernet 1/1 switch (config vlan 1) # show ip igmp snooping groups Vlan ID Group St/Dyn Ports 1 230.0.0.1 St Eth1/1 Total Num of Dynamic Group Addresses 0 Total Num of Static Group Addresses 1 switch (config vlan 1) # Related Commands show ip igmp snooping groups Note If the deleted interface is the last port, it deletes the entire multicast group. Mellanox Technologies 357 Mellanox® Technologies Confidential