HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 233
snmp-server notify, <port> | send-test}
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
Rev 1.6.9 snmp-server notify snmp-server notify {community | event | port | send-test} no snmp-server notify {community | event | port} Configures SNMP notifications (traps and informs). The no form of the commands negate the SNMP notifications. Syntax Description community Sets the default community for traps sent to hosts which do not have a custom community string set. event Specifies which events will be sent as traps. port Sets the default port to which traps are sent. send-test Sends a test trap. Default Community: public All informs and traps are enabled Port: 162 Configuration Mode Config History 3.1.0000 Initial version. 3.2.1050 Change traps to notify. Role admin Example switch (config) # snmp-server community public switch (config) # show snmp SNMP enabled: yes SNMP port: 1000 System contact: my-name System location: lab Read-only community: public Read-write community: private Interface listen enabled: yes No Listen Interfaces. Traps enabled: Default trap community: Default trap port: yes public 162 Related Commands No trap sinks configured. switch (config) # show snmp show snmp events Note • This setting is only meaningful if traps are enabled, though the list of hosts may still be edited if traps are disabled • Refer to Mellanox MIB file for the list of supported traps Mellanox Technologies 233 Mellanox® Technologies Confidential