HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 226
snmp-server community, no snmp-server community <community>
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
Rev 1.6.9 snmp-server community snmp-server community [ ro | rw] no snmp-server community Sets a community name for either read-only or read-write SNMP requests. The no form of the command sets the community string to default. Syntax Description community Community name. ro Sets the read-only community string. rw Sets the read-write community string. Default Read-only community: "public" Read-write community: "" Configuration Mode Config History 3.1.0000 Role admin Example switch(config) # snmp-server community private rw switch (config) # show snmp SNMP enabled: yes SNMP port: 161 System contact: System location: Read-only community: public Read-write community: private Interface listen enabled: yes No Listen Interfaces. Traps enabled: Default trap community: Default trap port: yes public 162 Related Commands No trap sinks configured. switch(config) # show snmp Note • If neither the "ro" or the "rw" parameters are specified, the read-only community is set as the default community • If the read-only community is specified, only queries can be performed • If the read-write community is specified, both queries and sets can be performed Mellanox Technologies 226 Mellanox® Technologies Confidential