HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 99
configuration jump-start, Syntax Description, Default, Configuration Mode, History, Example
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Rev 1.6.9 configuration jump-start configuration jump-start Runs the initial-configuration wizard. Syntax Description N/A Default N/A Configuration Mode Config History 3.1.0000 Role admin Example switch (config) # configuration jump-start Mellanox configuration wizard Step 1: Hostname? [switch-3cc29c] Step 2: Use DHCP on mgmt0 interface? y Step 3: Admin password (Enter to leave unchanged)? You have entered the following information: 1. Hostname: switch-3cc29c 2. Use DHCP on mgmt0 interface: yes 3. Enable IPv6: yes 4. Enable IPv6 autoconfig (SLAAC) on mgmt0 interface: yes 53. Admin password (Enter to leave unchanged): (unchanged) To change an answer, enter the step number to return to. Otherwise hit to save changes and exit. Choice: Configuration changes saved. switch (config) # Related Commands N/A Note • The wizard is automatically invoked whenever the CLI is launched when the active configuration file is fresh (i.e. not modified from its initial contents) • This command invokes the wizard on demand - see chapter "Initializing the Switch for the First Time" in the Mellanox MLNX-OS SwitchX User Manual Mellanox Technologies 99 Mellanox® Technologies Confidential