HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 333
switchport mode, switchport mode {access | trunk | hybrid | access-dcb}, Syntax Description, Default
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 333 highlights
Rev 1.6.9 switchport mode switchport mode {access | trunk | hybrid | access-dcb} no switchport mode Sets the switch port mode. The no form of the command sets the switch port mode to access. Syntax Description access Un-tagged port. 802.1q tagged traffic will be filtered. egress traffic is un-tagged. trunk 802.1q tagged port, un-tagged traffic will be filtered. hybrid Both 802.1q tagged and un-tagged traffic is allowed on the port. access-dcb Un-tagged port, egress traffic is priority tagged. Default access. Configuration Mode Config Interface Ethernet Config Interface Port Channel History 3.1.1400 Role admin Example switch (config) # interface ethernet 1/7 switch (config interface ethernet 1/7) # switchport mode access switch (config interface ethernet 1/7) # show interfaces switchport Interface | Mode | Access vlan | Allowed vlans Eth1/2 access 1 Eth1/3 access 1 Eth1/4/1 access 1 Eth1/4/2 access 1 Eth1/5 access 1 Eth1/6 access 1 .... Po34 access 1 Po4096 access 1 switch (config interface ethernet 1/7) # Related Commands show vlan show interfaces switchport switchport access vlan switchport [trunk | hybrid] allowed-vlan vlan Note Mellanox Technologies 333 Mellanox® Technologies Confidential