HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 329
show interfaces port-channel
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 329 highlights
Rev 1.6.9 show interfaces port-channel show interfaces port-channel {compatibility-parameters | load-balance | summary} Displays port-channel parameters. Syntax Description compatibility-parameters Displays the parameters that must be the same among the member ports of the port-channel interface. load-balance Displays the type of load-balancing in use for portchannels. summary Displays a summary of the port-channel interfaces. Default N/A Configuration Mode Any Command Mode History 3.3.4000 Role admin Example switch (config) # show interfaces port-channel compatibility-parameters * Port-mode * Speed * MTU * Flow Control * Access VLAN * Allowed VLAN list * Flowcontrol & PFC * Channel-group mode * CoS parameters Static configuration on the port should be removed: * ACL port binding * Static mrouter * Static mac address switch (config) #show interfaces port-channel load-balance source-destination-mac switch (config) #show interfaces port-channel summary Flags: D- Down P - Up in port-channel (members) I - Individual H - Hot-standby (LACP only) s - Suspended r - Module-removed U - Up (port-channel) Related Commands Group Port- Type Member Ports Channel switch (config) # Note Mellanox Technologies 329 Mellanox® Technologies Confidential