HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 392
deny/permit (IPv4 ACL rule)
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 392 highlights
Rev 1.6.9 deny/permit (IPv4 ACL rule) [seq-number ] {permit | deny} ip { [mask ] | [any]} { [mask ] | [any]} [action ] no Creates a rule for IPv4 ACL. The no form of the command deletes a rule from the IPv4 ACL. Syntax Description sequence-number Optional parameter to set a specific sequence number for the rule. The range is:1-500. deny | permit Determines the type of the rule, deny or permit action. {any | [mask ]} Sets source IP and optionally sets a mask for that IP address. The "any" option will cause the rule not to check the source IP. {any | [mask ]} Sets destination IP and optionally sets a mask for that MAC. The "any" option will cause the rule not to check the destination MAC. Default No rule is added by default to access control list. Default sequence number is in multiple of 10. Configuration Mode Config IPv4 ACL History 3.1.1400 Role admin Example switch (config ipv4 access-list my-list) # seq-number 10 deny ip any any switch (config ipv4 access-list my-list) # Related Commands ipv4/mac access-list ipv4/mac port access-group Note Mellanox Technologies 392 Mellanox® Technologies Confidential